普通型钢丝螺套
材料：1Cr18Ni9(1Cr18Ni9Ti) 
是由菱形多圈螺旋线圈组成，各种材料上使用它都能增强螺纹连接强度，普通型钢丝螺套分为有折断槽和无折断槽两种，有折断槽的丝套用于通孔或盲孔，无折断槽的丝套仅用于盲孔。
The common thread insert
material:1cr18ni9(1Cr18Ni9Ti)
It is composed of the multi-turn helix of rhombic and be capable of enhancing the screw connecting strength. It is divided
into two categories, with gutter of rupture and without gutter of
rupture. The former is used for the through hole or the blind hole
and the latter is used for the blind hole only.
锁紧型钢丝螺套
材料：1Cr18Ni9(1Cr18Ni9Ti)
是由菱形截面的钢丝绕成的多圈螺旋线圈，并有一圈以上多边形锁紧圈，当螺钉拧入螺孔进入锁紧装置时，需用工具加力拧入，其锁紧圈可以锁紧螺钉，防止螺纹连接松动，反复拆卸，锁紧力矩长久保持。
the locking thread insert
material:1cr18ni9(1Cr18Ni9Ti)
It is composed of the multi-turn helix of rhombic and has more than one polygon locking ring. when the nut is screwed into the locking devices it is locking ring can lock the nut after pressure to prevent the screen joint loosening.
专用丝锥
材料：高速钢(6542 9341)
用于加工丝套底孔的专用丝锥，可机用也可手用。
又分为：直槽、螺旋槽、挤压丝锥。
The special tap
Material: the high-speed steel (6542 9341).
It is used to work the thread insert’ s bottom hole which is used mechanically and manually .it is divided into three categories . the seraigh channel ,the spiral scroll and the squeezing tap.
套筒安装扳手
材料：≤M8 LY12 ≥M10 45#钢
用于螺套的安装，其基本原理是使螺套通过扳手前一段引导螺纹， 迫使外径收缩，以便顺利装入底孔，使用套筒安装扳手安装，可以提
高效率，同时减少报废率。
The manual wrench
Material:≤M8LY12 ≥M10 45#steel
It is used for the installment of the thread insert .It is the basic principle that the thread insert is guided firstly to force the outside diameter shrinkage to pack it into the bottom hole smoothly.The efficiently is enhanced and the scrap rate is reduced through using the wrench.
电动安装扳手
使用范围：M3~M12
用于大批量螺套的安装或适用于装配生产线。
The electric wrench
The using range :M3~M12
It is used in the assemblage of the multitudinous thread insert or used in the assembling the production.
安装柄冲断器
材料：40Cr 
用于去除安装在通孔内的安装柄，将冲断器对准安装柄，用200g左右的榔头猛击一下即可除去，使其形成通孔。
The tail of break-off tool
Material:40cr
It is used in breaking off the thread insert tail of the through hole, the break-off tool is aligned to the tail and breaks it off with a 200g hammer punching to form it into the throng hole.
卸套器
材料：高速钢 
用于取出安装过程中出现问题的螺套，用榔头猛击一下，加力按下手柄，反方向旋转即可取出，再重新安装螺套。
Extractor
Material:the high-speed steel
Enable users to extract a thread insert fitted with defect. Thanks to it is triangular shape. the extractor can be locked into the thread insert, by rotating the tool while keeping a vertical thrust, the thread insert can be unscrewed.
底孔塞规
材料：Cr Mn
用于检验钢丝螺套安装前的底孔尺寸，对工件精度要求较高或鉴别丝锥是否磨损时使用。
Plug Gauge
Material:Cr Mn
It enables users to check the conformity of the tapping before insertion of thread inserts for the work piece for having high accuracy.
自锁型螺母
材料：35#钢
将锁紧型钢丝螺套装入螺母中，形成有锁紧功能的螺孔，能有效防止螺母在机器设备振动时松动，还能反复拆装使用。
The self-locking nut
Material:35# steel
It makes the nut impossible to unscrew when the machine is vibrating, after the locking thread insert is stetted into the nut. It is capable of removing and using time after time
维修螺孔工具箱
使用范围：M2-M64
用于无动力的任何场所，是现场维修螺孔的好帮手。
Repair tool kit
Range:M3-M64
Repair kits provide all necessary tools thread tapping or to quickly and economically repair them.
|
